![]() ![]() This controller is supported only in this server version: Use SAS/SATA cable included with chassis to connect interposer board to drive backplane.Ĭontroller is orderable only as UCSC-MRAID1G-KIT This controller is supported only in these server versions:Īll server versions can use the embedded SATA controller to control two internal SATA M.2 drives.Ĩ front-loading SATA drives (drive bays 1 - 8) This server supports the RAID and HBA controller options and cable requirements shown in the following table. NVMe PCIe SSDs cannot be controlled by a SAS/SATA RAID controller. This combination is not supported and could result in data loss. Do not use the embedded SATA controller and a hardware-based RAID controller cardĪt the same time. The server has a software-based SATA RAID controller embedded in the system.ĭo not mix controller types in the server. ![]() This server supports a single, PCIe-style, SAS RAID or HBA controller that plugs into a dedicated internal riser. This appendix provides storage controller (RAID and HBA) information.
0 Comments
Leave a Reply. |